Almost everything in your kitchen is prone to leaking – the sink, the dishwasher, even the refrigerator.

Fortunately for you, not all leaky refrigerators require expensive repairs. In fact, you can fix many leaks yourself by using the simple step-by-step instructions below.

Why is my refrigerator leaking?

Often times, when you notice water pooling in or around your refrigerator, it isn’t actually leaking. Refrigerators produce a large amount of condensation. When everything is working, this condensation runs down a drain tube into a drip pan under the appliance, where it evaporates unnoticed. However, when your fridge is “leaking”, it is likely that this water just isn’t draining properly.

This is primarily due to two reasons: a clogged drain tube or an unlevel refrigerator. Here is how to fix both.

How to fix an unlevel refrigerator

1. Pull off the toe grille at the base of the refrigerator.

2. Using a flathead screwdriver, adjust the legs until your refrigerator is even. Turning the screwdriver clockwise will raise the leg, counterclockwise will lower it.

3. Use a level to make sure your refrigerator is even, and snap the toe grille back into place.

How to fix a clogged drain tube

1. Unplug the refrigerator.

2. Remove the crisper drawers from the unit. You should see the drain tube on the bottom of the back wall.

3. A piece of ice is likely the culprit for the clog. Use a hair dryer to melt it, or poke it out with a Q-tip or a pipe cleaner.

4. Flush the tube with warm water.

5. Replace the crisper drawers and plug your refrigerator in.

Not all refrigerator leaks are so simple to fix – sometimes, you will need to call in a licensed professional. If you live in New York City, Nassau County, or Suffolk County, look no further than Speedy Refrigerator Service. We can fix any make or model of refrigerator and offer 24/7 emergency service. Call us any time at 866-782-9376.